Braeburn 5100 Bedienungsanleitung PDF herunterladen

MODEL

5100

USER MANUAL

Compatible with low voltage multi-stage

heat/cool systems with up to two stages of

heating and two stages of cooling.

READ ALL INSTRUCTIONS BEFORE PROCEEDING

WARNING!

Important Safety Information

• Always turn off power to the air conditioning or heating system prior to installing, removing,

cleaning or servicing thermostat.

• Read this manual thoroughly prior to installing, programming or operating this thermostat.

• This thermostat is designed for use with a 24 Volt AC low voltage multi-stage heat / cool system.

• Do not use this thermostat on systems with voltages higher than 30 Volts AC.

• This thermostat requires 24 Volt AC Power for normal operation and control of the heating or

cooling system.

• The thermostat also requires two (2) properly installed "AA" alkaline batteries to retain clock

settings in the event of loss of AC Power due to power outage or rolling blackouts.

• Wiring must conform to all building codes and ordinances as required by local and national code

authorities having jurisdiction.

• Do not short (or jumper) across terminals on the gas valve or at the heating or cooling system

control board to test the thermostat installation. This could damage the thermostat and void

the warranty.

• Do not select COOL mode of operation if the outside temperature is below 50˚ F (10˚ C). This

could possibly damage the controlled cooling system and may cause personal injury.

• This thermostat should only be used as described in this manual. Any other use is not

recommended and will void the warranty.

SPECIFICATIONS

• Electrical Rating: 24 Volt AC (18-30 Volt AC)

1 amp maximum load per terminal

3 amp total maximum load (all terminals)

• Control Range: 45˚ - 90˚ F (7˚ - 32˚ C)

• Accuracy: +/- 1˚ F (+/- .5˚ C)

• AC Power: 18-30 Volt AC

• DC Back-Up Power: 3.0 Volt DC (2 AA Alkaline batteries included)

• Compatibility: Multi-stage heat / cool systems with up to two stages

of heating and two stages of cooling

• Terminations: R, Y1, Y2, W1, W2, G, O, B, C

INSTALLATION

2.1

Replacing Existing Thermostat

Always turn off power to the air conditioning or heating system prior to removing

existing thermostat.

Remove the cover of your old thermostat and locate the wire terminals. Do not remove

wires from terminals yet.

Using small pieces of masking tape, label wires prior to removal from terminals. Use

the chart below to determine the new terminal designations for your new thermostat.

Premier Series

Universal 7 Day or 5-2

Day Programmable

2-Heat/2-Cool Heat/Cool

Digital Thermostat

Old Terminal from New Terminal for

Existing Thermostat New Thermostat Terminal Description

R, V-VR or VR-R R 24 VAC

Y, Y1 or M Y1 1st Stage Cooling

Y2 Y2 2nd Stage Cooling

W1 W1 1st Stage Heating

W2 or W-U W2 2nd Stage Heating

G or F G Fan Control

O or R O Reversing Valve (Cooling)

B B Reversing Valve (Heating)

C, X or B C Transformer Common

CONTENTS

SPECIFICATIONS

INSTALLATION

TESTING YOUR NEW THERMOSTAT

PROGRAMMING

ADDITIONAL OPERATION FEATURES

TROUBLESHOOTING

WIRING DIAGRAM

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - USER MANUAL

MODEL5100USER MANUALCompatible with low voltage multi-stage heat/cool systems with up to two stages of heating and two stages of cooling. READ ALL INS

Seite 2 - INSTALLATION

2 32.2Installing Your New Thermostat13. Locate the internal ˚F / ˚C switch on the circuit board.14. Using your ﬁnger, gently ﬂip the switch toward th

Seite 3

5. Press the RETURN button again and the LCD display will show "FAN XX", where "XX" equals the fan delay time in second

Seite 4

cont.6PROGRAMMING4Weekday Weekend4.4Setting Your Energy Saving Programs–Tips Before Starting• It is important for you to set the current time of

Seite 5

985.1Review Set Temperature5.2Temporary Program Override1. Press and hold or button. The current setpoint temperature will be displayed i

Seite 6 - OPERATION FEATURES

11105.6Adaptive Recovery Mode (ARM™)TROUBLESHOOTING6This thermostat is equipped with a special feature to maximize your energy savings by utilizing th

Seite 7

The Keypad is locked. Press both the and key together at the same time for one second to unlock (see section 5.5).12 13TROUBLESHOOTING6cont.

Seite 8 - Store this

14TROUBLESHOOTING6cont.SYMPTOM POTENTIAL SOLUTIONFan continues to run all the time whether the system is on or off.Check that the fan control switch i

Kommentare zu diesen Handbüchern

Keine Kommentare

Braeburn 5100 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Braeburn 5100 herunter. Braeburn 5100 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Braeburn 5100